News

New C audio level controllers

Designed for practicality and simplicity of installation.

 

C controllers are reliable tools to control the audio levels at locations. The product range consists of C5, C30 and C60, corresponding to 5, 30 and 60 W audio lines. It could be used in voice evacuation systems with a build-in 24V emergency relay. The relay has a switch to select an active or passive mode of the controller. The installation of the C control is very simple, without any screws on the top of the cover.

 

Read more about C volume controllers

New 04 and 05 loudspeakers
New 04 and 05 loudspeakers

New design loudspeakers for clear and rich sound.

 

AMC Baltic proudly introduces loudspeakers 05 and 04 the first models of a new generation loudspeaker family. Experienced audio engineers have developed loudspeakers with a very responsive woofer diaphragm and tweeter with outstanding clear and rich sound at any volume level, which would not be possible without precise crossover implementation. Robust and durable body, aluminum grill allows to use these loudspeakers inside and outside. We focused on every detail to create a loudspeaker design that perfectly fits the modern interiors and would be accepted by most architects.
A built-in 100 V transformer and 16 Ω power tap make these loudspeakers suitable for background music and public address systems, as well as for home use with low impedance installations.
Big attention has been directed to simplifying installation works and adjusting the cabinet for the final position. Loudspeakers can be mounted vertically and horizontally, the logo rotates depending on its position. Smart mounting brackets are letting mount and adjust the loudspeakers in a very easy way with wide angles horizontally and vertically.

 

Read more about 04 and 05 loudspeakers

New automatic Weekly Player
New automatic Weekly Player

Time to plan your ads and announcements the simple way!

 

Weekly Player plays audio files according to the schedule list which was programmed on PC and recorded on SD card. This player can play music between the scheduled announcements if programmed so. For a quick and easy announcement start, the player provides direct access buttons for four recorded audio messages. The player has microphone input with priority and phantom power. It supports external control in order to play or stop audio files remotely via eight dry contacts.

 

Read more about Weekly Player

New members of DMPA Light
New members of DMPA Light

DMPA Light media amplifiers audio setup makes easy.

 

New models in DMPA Light family - more powerful options DMPA 120 Light and DMPA 240 Light power amplifiers. The new models will be produced instead of DMPA 60/120/240 models.

DMPA Light - Class-D audio amplifiers with integrated media USB player with AUX input, Bluetooth and FM radio receivers, 1 microphone input, emergency mute control. Priority microphone input and phantom power activation features add more versatility to any public address system. A very compact design will allow using these amplifiers in different places and ensures easy access to your audio system control.

 

DMPA 240 Light is available from the end of October.

 

See all DMPA series products here

 

New iAC power amplifiers
New iAC power amplifiers

Class D iAC series power amplifiers with integrated signal processor.

 

Designed for 100V and low impedance background music systems. The model line consists of single-channel and two-channel amplifiers. They all have an RS232 control port for integration amplifier with third-party automation systems. It allows the use iAC amplifiers in large and complex audio systems that can be automated and controlled remotely. Amplifiers audio processor gives a choice to control treble, middle, and bass tones, also there are options to mute, lock and control stand-by mode, by using LCD screen or RS232 protocol.

 

 

 In stock from the end of 2021.

Read more about iAC

New AMP professional power amplifiers
New AMP professional power amplifiers

AMC introduces new professional D class power amplifiers AMP 500, AMP 1500, and AMP 4X500 for any venue that values great sound reinforcement with easy usage and reliability. AMP series consists of from 2 up to 4 channels amplifiers with different RMS power options. Fully separated channels and power supplies guaranteed the highest performance. XLR and Speak on connectors make it compatible with almost any professional devices. Despite its compact size 1U, these power amplifiers can be loaded with loudspeakers from 500W to 1,5 kW.

 

See all AMP series products here

New ceiling loudspeakers series MCR
New ceiling loudspeakers series MCR

Introducing our new MCR steel case loudspeakers with completely rimless grill. With very clean surface and elegant minimalistic design, excellent appearance with minimal influence to interiors. Powerful full range sound reproduction, designed for background music and paging needs. Installers will appreciate industry approved single-push fixings for mounting and spring-loaded connection terminal for quick installation without tools. MCR loudspeakers will be available in September.

 

MCR 6T – background music oriented 20 W full range loudspeaker for places, where loud, rich and accurate sound is desired. MCR 6T has the slimmest design among all AMC ceiling loudspeakers, with only 3 mm high grill edge visible in the ceilings.

 

MCR 4T – smaller in size 6 W full range loudspeaker for general paging and background music needs. Just like the bigger MCR 6T model, MCR 4T has almost invisibly slim grill of only 4 mm. SPL coverage accuracy can be improved even further with optional BC 4 plastic back cover.

 

See all MCR series products here.

New member of PCR range
New member of PCR range

New addition to our popular ceiling loudspeaker range – PCR 2T. It combines 2.5“ driver with 6 W output with internal 100 V power transformer. Spring loaded connection terminal for quick installation, small dimensions and rimless design for interiors, where sound system components should be invisible. PCR 2T loudspeakers will be available in September.

 

Read more about PCR 2T here

MP 22 music players
MP 22 music players

MP 22 two-zone audio player with two independent players with separate FM and Bluetooth audio receivers. Plays audio files from SD cards and USB drives. Individual volume and tone controls, selectable input for each output. Two-zone paging is available with AMC TALK ST Z2, providing gain and tone control, phantom power and signal priority. External audio sources can be connected using 2 stereo line inputs or 3,5mm TRS AUX input on the front panel.

DMPA media player amplifiers
DMPA media player amplifiers

DMPA are new class-D amplifiers with integrated media player. With power output options of 60 W, 120 W, and 240 W for use with high and low impedance speaker lines. With internal SD / USB media player, AUX in and two microphone inputs with phantom power and input priority activation. 1U half rack size. For smaller scale installations in background music and paging systems.

iMIX 5 zone router
iMIX 5 zone router

Zone router with 5 stereo outputs for multi-zone audio control. iMix5 has 4 audio source inputs, which can be routed to any of 5 available outputs. Sources at individual zones can be selected by zone selector on the front panel, using a wall plate controller or RS232 commands. IMix5 has an internal media player with USB, Bluetooth, FM receiver, and AUX input. Priority input and external mute connectors for emergency audio installations.

iSpeak 5R surface mount plastic loudspeakers
iSpeak 5R surface mount plastic loudspeakers

iSpeak 5R 6 W ABS plastic with metal grill cabinet loudspeakers with built-in 100 V transformer and internal volume attenuator. 5" (127 mm) full range speaker. Can be used in emergency 9 wire systems to transmit voice evacuation messages at maximum volume regardless of the volume attenuator setting. Simple installation on any flat surface horizontal or vertical. Rotating logo. Ideal for use for public address and background music applications. Best for retail shops, schools, and government buildings.

PCR 5 magnetic grill plastic ceiling loudspeakers
PCR 5 magnetic grill plastic ceiling loudspeakers

PCR5 5-inch (130 mm) woofer, 0.5 inches (13 mm) tweeter 25 W (16Ω) plastic ceiling loudspeakers for low impedance audio. Magnetic grill fixings. Easy and quick installation into false ceilings. Minimalistic design approved for sensitive interiors.

PCR 8 magnetic grill plastic ceiling loudspeakers
PCR 8 magnetic grill plastic ceiling loudspeakers

PCR 8 8 inches (200 mm) woofer, 0,5 inch (13 mm) tweeter 35 W (16Ω) plastic ceiling loudspeakers for low impedance audio. The loudspeaker coil is specially made 16Ω in order to use more speakers in one chain. 16Ω allows connecting two speakers in parallel and have an 8Ω load, or connect even 4 and use the system with a 4Ω professional audio amplifier or stereo receiver. Magnetic grill fixings. Easy and quick installation into false ceilings. Minimalistic design approved for sensitive interiors.

Power Box 51 powered system
Power Box 51 powered system

Power Box 51 is a pair of two-way loudspeakers consisting of a loudspeaker with a built-in stereo amplifier and a second non-powered loudspeaker ready to connect to active by Euroblock connector. High efficiency 2 x 20 W D class power amplifier. 5” woofer and 1” tweeter. U-bracket for mounting on the wall or ceiling.

Power Box 61 powered system
Power Box 61 powered system

Power Box 61 is a pair of two-way loudspeakers consisting of a loudspeaker with a built-in stereo amplifier and a second non-powered loudspeaker ready to connect to active by Euroblock connector. High efficiency 2 x 30 W D class power amplifier. 6” woofer and 1” tweeter. U-bracket for mounting on the wall or ceiling.

VIVA 3 wall mount plastic loudspeakers
VIVA 3 wall mount plastic loudspeakers

Our newest high-profile loudspeaker VIVA 3 combines the best design and great sound. VIVA 3 is our smallest cabinet loudspeaker with an elegant mounting bracket. It has a built-in high-quality 3-inch precision coaxial driver with excellent sound reproduction. Those who will design 100V systems can install this speaker directly, the loudspeaker has a built-in 100V transformer. For low impedance speaker lines - 16Ω speaker input can be selected. This allows using more speakers in one chain. VIVA 3 was equipped with professional input and output Phoenix connectors to make installation simple and easy. Speakers are designed to use in upscale shops, restaurants, bars, and other places, where high-quality background music is required. In combination with our subwoofer SUB 100V, sound can be enhanced with low frequency.

OCTO digital signal processor
OCTO digital signal processor

OCTO – 8 input and 8 output full matrix DSP platform for microphone and line level audio processing. High performance 48 kHz sampling rate 24-bit AD/DA converters. Processor configuration can be done in real time with a computer via Ethernet. All inputs have compressors, equalizer, gate, and audio gain functions and are designed for both lines mic level audio signals. Phantom power, sine wave, pink and white noise generators, auto mixer, priority control. Automatically adjust output level according to ambient noise microphone measurements. Limiter and EQ are designed for all outputs. GPIO programmable inputs and outputs. User-friendly and intuitive operation software.